Does anybody have experience with both systems enough to compare them?

I’m currently using ifupdown on my Debian server as that’s the default, but it seems that the modern way of managing the local network is via systemd-networkd so I’m contemplating putting the effort in to migrate.

Would those of you who have experience with it, recommend it?

In my short investigation, I have made the following observations:

  • using networkd means you can use networkctl to manually control the interfaces which is quite convenient
  • networkd aims to be fully declarative
  • networkd separates the creation of virtual interfaces (netdev files) from their configuration (network files)
  • networkd doesn’t support all networking features (e.g. namespaces)
  • networkd is systemd, but surprisingly I can’t find information on how to create other unit files that depend on the individual network files going up or down, other than networkd-dispatcher. I don’t like dispatcher because just like ifupdown it triggers all the scripts and you need if tests to exclude all interfaces you don’t need to be affected. I’d like to write unit files that can be targeted to activate and deactivate when a particular interface goes up or down.
  • networkd, other than via dispatcher, does not seem to support adding arbitrary commands to run like ifupdown supports via e.g. pre-down, post-up, etc.
  • mystik@lemmy.worldEnglish
    3·
    1 year ago

    Personally, I will use both: On servers with fixed network connections I will tend to use ifupdown; but on my linux laptops I’ll use networkmanager or networkd which tend to have nice UI’s for joining various forms of wifi networks. On my laptops for some VPN’s i"ll use the ifupdown configuration, which lets me setup all sorts of exotic configurations (bridges, vlans, vxlan, vpns, namespaces, etc.) The linux command line tooling has a litany of functions to check/test/diagnose/tweak networking settings, and they work across all the distros, AND they can reveal the full details of the network, as the kernel sees it. NetworkManager, networkd, connmann, etc, often omit details in the name of simplifying for the most common scenarios.

  • TCB13@lemmy.worldEnglish
    41·
    1 year ago

    First thing I do after every server Debian install: remove that old networking, remove chrony, install systemd-networkd, systemd-resolved, systemd-timesyncd. Why? Because 1) you get a way cleaner system that runs less processes to do the same and 2) systemd-* is better.

    • dr_robot@kbin.socialOP
      1·
      1 year ago

      Thanks for your reply! One thing I’m struggling with networkd is hysteresis. That is, toggling the interface down and then back up does not do what I expect it to. That is, setting the interface down does not clear up the configuration, and setting the interface up does not reconfigure the interface. I have to run reconfigure for that. I was hoping that the declarative approach of networkd would make it easy to predict interface state and configuration.

      This does make sense because configuration is not the same as operational state. However, what would the equivalent of ifdown (set interface down and remove configuration) and ifup (set interface up and reconfigure) be using networkd and networkctl? This kind of feature would be useful for me to test config changes, debug networking issues, disconnect part of the network while I’m making some changes, etc.

      • TCB13@lemmy.worldEnglish
        2·
        1 year ago

        I get your points and that’s a valid issue however, systemd-networkd is designed for more persistent configurations but you’ve a few options:

        1. systemctl reload systemd-networkd and networkctl reload. Don’t forget that if you change units on the filesystem a systemctl daemon-reload is required before the previous commands.

        2. networkctl commands such as reload, reconfigure, up, down and renew. Read more about them here.

        3. Temporary / volatile runtime units: manually drop a config under /run/systemd/network/ it will apply until you reboot the machine.

        4. Transient scope units: those are kind of supersede temporary units as they are managed through a D-Bus interface so 3rd party applications can manage systemd. They don’t seem to work right now for network, but this allows you to change unit options dynamically.

        An interesting thing to consider is that in most cases you can have your network configurations in /etc/systemd/network but only bring them online when required. This for me seems to solve most cases, you’ve your network all configured and ready to go.

        • dr_robot@kbin.socialOP
          1·
          1 year ago

          Thanks for this useful reply! I think I’ll just need to closely examine my setup and figure out if I really need the ability to up/down interfaces like I described or whether the more persistent approach of networkd is actually more suitable for me. Sometimes I just want to reproduce behaviour that I’ve used before, but may not actually need.

          • TCB13@lemmy.worldEnglish
            2·
            1 year ago

            Well networkctl up enXX + pre-configured network files with the addresses and whatnot might be a suitable for your requirements.

  • TheInsane42@lemmy.worldEnglish
    23·
    1 year ago

    I’m using ifupdown2 and have services depending on the state of virtual network devices (BindsTo=sys-devices-virtual-net-.device).

    I hate systemd with a passion, as the refuses to wait for networking when you haven some service specified to be started After networking, but it start when the start of networking actions has sbeen tarted (not after networking is finished bringing up everything)

    The only think I let systemd do is monitor the state of the devices and set the interface name, as udev seems to mess these names up in combination with systemd (and there is to much depending on systemd now in Debian to get rid of the junk)

    • TCB13@lemmy.worldEnglish
      1·
      1 year ago

      I hate systemd with a passion, as the refuses to wait for networking when you haven some service specified to be started After networking

      If you apply what is written at https://www.freedesktop.org/wiki/Software/systemd/NetworkTarget/#cutthecraphowdoimakesurethatmyservicestartsafterthenetworkisreallyonline it will work.

      Systemd-networkd has a learning curve, once you learn it you’ll find it superior and more flexible than anything else.

      • TheInsane42@lemmy.worldEnglish
        1·
        1 year ago

        If you apply what is written at https://www.freedesktop.org/wiki/Software/systemd/NetworkTarget/#cutthecraphowdoimakesurethatmyservicestartsafterthenetworkisreallyonline it will work.

        Then I’ll need to do a global rewrite of all distrubution delivered service files and replace network.target with network-online.target. Then I don’t understand why maintainers all keep using network.target. For every service that needs some kund of netwirj active I alkready have iverrides to link then to the virtual or physical interfaces they actually use.

        Systemd-networkd has a learning curve, once you learn it you’ll find it superior and more flexible than anything else.

        I still find it a solution desperately looking for a problem to solve. Yes, you can control loads of dependencies, but you could already do that with the init scripts. The main selling point on introduction was ‘it is faster’. Why would you want something faster when you use it once every kernel update? When you design your solutions correctly (redundant), you won’t even notice a reboot of 1 system in the setup.

        • TCB13@lemmy.worldEnglish
          2·
          1 year ago

          Then I don’t understand why maintainers all keep using network.target.

          Because most services are able to dynamically accommodate networking changes and act accordingly and it’s rare to have cases where we really need a working link with addresses and a proper connection when the service starts. For those special cases, as described, you need to enable systemd-networkd-wait-online.service and include After=network-online.target and/or Wants=network-online.target in your service.

          Programs should be designed to detect and react to networking changes and both Apache and Nginx are good examples of software that does that. There are simpler cases like stuff that needs to bind to non-existent IPs at boot (before networking) that can be dealt with ipv4.ip_nonlocal_bind and net.ipv6.ip_nonlocal_bind as described here.

          This may also interest you as it includes what “up” means a few other details: https://systemd.io/NETWORK_ONLINE/

          I still find it a solution desperately looking for a problem to solve.

          Systemd does a LOT more than “you can control loads of dependencies”, it solves tons of painful issues and provides a cohesive ecosystem of tools to manage stuff like:

          Systemd is very useful and most people (including myself) don’t know about half of the things it can do. It isn’t teached because of the current poor state of thing when it comes to software development but if you use it you’ll quickly find how to have systems running very well with less processes than conventionally.