I would documented everything as I go.
I am a hobbyist running a proxmox server with a docker host for media server, a plex host, a nas host, and home assistant host.
I feel if It were to break It would take me a long time to rebuild.
Ansible everything and automate as you go. It is slower, but if it’s not your first time setting something up it’s not too bad. Right now I literally couldn’t care less if the SD on one of my raspberry pi’s dies. Or my monitoring backend needs to be reinstalled.
I would have taken a deep dive into docker and containerised pretty much everything.
Same here. Now I’m half docker and half random other stuff.
I’m mostly docker. I want to selfhost Lemmy but there’s no one-click Docker Compsoe / Portainer installer yet (for Swag / Nginx proxy manager) so I won’t until it’s ready
Buy an actual NAS instead of a rats nest of USB hub and drives. But now it works so I’m too lazy and cheap to migrate it off.
I haven’t built one myself, but you could look into TrueNas.
I already did a few months ago. My setup was a mess, everything tacked on the host OS, some stuff installed directly, others as docker, firewall was just a bunch of hand-written iptables rules…
I got a newer motherboard and CPU to replace my ageing i5-2500K, so I decided to start from scratch.
First order of business: Something to manage VMs and containers. Second: a decent firewall. Third: One app, one container.
I ended up with:
- Proxmox as VM and container manager
- OPNSense as firewall. Server has 3 network cards (1 built-in, 2 on PCIe slots), the 2 add-ons are passed through to OPNSense, the built in is for managing Proxmox and for the containers .
- A whole bunch of LXC containers running all sorts of stuff.
Things look a lot more professional and clean, and it’s all much easier to manage.
Does that setup allow access to PCIe GPUs for CUDA inference from containers or VMs?
Can’t say anything about CUDA because I don’t have Nvidia cards nor do I work with AI stuff, but I was able to pass the built-in GPU on my Ryzen 2600G to the Jellyfin container so it could do hardware transcoding of videos.
You need the drivers for the GPU installed on the host OS, then link the devices on /dev to the container. For AMD this is easy, bc the drivers are open source and included in the distro (Proxmox is Debian based), for Nvidia you’d have to deal with the proprietary stuff both on the host and on the containers.
My current homelab is running on a single Dell R720xd with 12x6TB SAS HDDs. I have ESXi as the hypervisor with a pfsense gateway and a trueNAS core vm. It’s compact, has lots of redundancy, can run everything I want and more, has IPMI, and ECC RAM. Great, right?
Well, it sucks back about 300w at idle, sounds like a jet engine all the time, and having everything on one machine is fragile as hell.
Not to mention the Aruba Networks switch and Eaton UPS that are also loud.
I had to beg my dad to let it live at his house because no matter what I did: custom fan curves, better c-state management, a custom enclosure with sound isolation and ducting, I could not dump heat fast enough to make it quiet and it was driving me mad.
I’m in the process of doing it better. I’m going to build a small NAS using consumer hardware and big, quiet fans, I have a fanless N6005 box as a gateway, and I’m going to convert my old gaming machine to a hypervisor using proxmox, with each VM managed with either docker-compose, Ansible, or nixOS.
…and I’m now documenting everything.
I’ve had an R710 at the foot of my bed for the past 4 years and only decommissioned it a couple of months ago. I haven’t configured anything but I don’t really notice the noise. I can tell that it’s there but only when I listen for it. Different people are bothered by different sounds maybe?
I had an r710 before the r720xd. The r710 was totally fine, the r720xd is crazy loud.
Huh that’s interesting, thanks!
More ram 🐏
Make sure my proxmox desktop build can do GPU passthrough.
I’d make my own nas.
I have things scattered around different machines (a hangover from my previous network configuration that was running off two separate routers) so I’d probably look to have everything on one machine.
Also I kind of rushed setting up my Dell server and I never really paid any attention to how it was set up for RAID. I also currently have everything running on separate VMs rather than in containers.
I may at some point copy the important stuff off my server and set it up from scratch.
I may also move from using a load balancer to manage incoming connections to doing it via Cloudflare Tunnels.
The thing is there’s always something to tinker with and I’ve learnt a lot building my little home lab. There’s always something new to play around with and learn.
Is my setup optimal? Hell no. Does it work? Yep. 🙂
To be honest, nothing. Running my home server on a nuc with proxmox and a 8 bay synology Nas (though I’m glad that I went with 8 bay back then!).
As a router I have opnsense running on a low powered mini pc.All in all I couldn’t wish for more (low power, high performance, easy to maintain) for my use case, but I’ll soon need some storage and ram upgrade on the proxmox server.
I would spend more time planning and understanding docker. My setup works, but it’s kinda messy
I would’ve gone with a less powerful nas and got a separate unit for compute. I got a synology nas with a decent amount of compute so I could run all my stuff on the nas, and the proprietary locked down OS drives me a bit nuts. Causes all sorts of issues. If I had a separate compute box I could just be running some flavor of Linux, probably Ubuntu and have things behave much more nicely
Go with used & refurb business PCs right out of the gate instead of fucking around with SBCs like the Pi.
Go with “1-liter” aka Ultra Small Form Factor right away instead of starting with SFF. (I don’t have a permanent residence at the moment so this makes sense for me)
Ah, but now you have a stack of PiS to screw around with, separate from all the stuff you actually use.
I built a compact nas. While it’s enough for the drives I need, even for upgrades, I only have 1 pcie x4 slot. Which is becoming a bit limiting. I didn’t think i’d have a need for for either a tape drive or a graphics card, and I have some things I want to do that require both. Well, I can only do one unless I get a different motherboard and case. Which means i’m basically doing a new build and I don’t want to do either of the projects I had in mind enough to bother with that.
I’d put my storage in a proper nas machine rather than having 25tb strewn across 4 boxes
