I only remember doing this with FireWire. Which model supported target disk mode over USB-A?

Probably not what you’re asking for, but I have an impression, that your primary motivation is curiosity and just good feeling of using the open platform, so I figured I’ll mention it.

I’m using ESP32-C3 boards with some sensors and ESPHome to monitor air quality in my house. The board is RISC-V based and can be bought for real cheap. (single digit $ price generally) ESPHome is quite easy to work with and (If you’re realistic with your expectations around very low power device) also quite powerful.

Honestly the ESPHome itself is almost too good if you’re really curious as it abstracts the differences between various boards quite well. You’re just editing a yaml file to define your desired functionality.

Even if you’re hesitant to do some soldering, you can get pretty far if you buy board and sensors with pre-soldered pins and some jumper wires.

The default tier of AWS glacier uses tape, which is why data retrieval takes a few hours from when you submit the request to when you can actually download the data, and costs a lot.

AFAIK Glacier is unlikely to be tape based. A bunch of offline drives is more realistic scenario. But generally it’s not public knowledge unless you found some trustworthy source for the tape theory?

FWIW restic repository format already has two independent implementations. Restic (in Go) and Rustic (Rust), so the chances of both going unmaintained is hopefully pretty low.

Let me be more clear: devs are not required to release binaries at all. Bit they should, if they want their work to be widely used.

Yeah, but that’s not there reality of the situation. Docker images is what drives wide adoption. Docker is also great development tool if one needs to test stuff quickly, so the Dockerfile is there from the very beginning and thus providing image is almost for free.

Binaries are more involved because suddenly you have multiple OSes, libc, musl,… it’s not always easy to build statically linked binary (and it’s also often bad idea) So it’s much less likely to happen. If you tried just running statically linked binary on NixOS, you probably know it’s not as simple as chmod a+x.

I also fully agree with you that curl+pipe+bash random stuff should be banned as awful practice and that is much worse than containers in general. But posting instructions on forums and websites is not per se dangerous or a bad practice. Following them blindly is, but there is still people not wearing seatbelts in cars or helmets on bikes, so…

Exactly what I’m saying. People will do stupid stuff and containers have nothing to do with it.

Chmod 777 should be banned in any case, but that steams from containers usage (due to wrongly built images) more than anything else, so I guess you are biting your own cookie here.

Most of the time it’s not necessary at all. People just have “allow everything, because I have no idea where the problem could be”. Containers frequently run as root, so I’d say the chmod is not necessary.

In a world where containers are the only proposed solution, I believe something will be taken from us all.

I think you mean images not containers? I don’t think anything will be taken, image is just easy to provide, if there is no binary provided, there would likely be no binary even without docker.

In fact IIRC this practice of providing binaries is relatively new trend. (Popularized by Go I think) Back in the days you got source code and perhaps Makefile. If you were lucky a debian/src directory with code to build your package. And there was no lack of freedom.

On one hand you complain about docker images making people dumb on another you complain about absence of pre-compiled binary instead of learning how to build stuff you run. A bit of a double standard.

I don’t agree with the premise of your comment about containers. I think most of the downsides you listed are misplaced.

First of all they make the user dumber. Instead of learning something new, you blindly “compose pull & up” your way. Easy, but it’s dumbifier and that’s not a good thing.

I’d argue, that actually using containers properly requires very solid Linux skills. If someone indeed blindly “compose pull & up” their stuff, this is no different than blind curl | sudo bash which is still very common. People are going to muddle through the installation copy pasting stuff no matter what. I don’t see why containers and compose files would be any different than pipe to bash or random reddit comment with “step by step instructions”. Look at any forum where end users aren’t technically strong and you’ll see the same (emulation forums, raspberry pi based stuff, home automation,…) - random shell scripts, rm -rf this ; chmod 777 that

Containers are just another piece of software that someone can and will run blindly. But I don’t see why you’d single them out here.

Second, there is a dangerous trend where projects only release containers, and that’s bad for freedom of choice

As a developer I can’t agree here. The docker images (not “containers” to be precise) are not there replacing deb packages. They are there because it’s easy to provide image. It’s much harder to release a set of debs, rpms and whatnot for distribution the developer isn’t even using. The other options wouldn’t even be there in the first place, because there’s only so many hours in a day and my open source work is not paying my bills most of the time. (patches and continued maintenance is of course welcome) So the alternative would be just the source code, which you still get. No one is limiting your options there. If anything the Dockerfile at least shows exactly how you can build the software yourself even without using docker. It’s just bash script with extra isolation.

I am aware that you can download an image and extract the files inside, that’s more an hack than a solution.

Yeah please don’t do that. It’s probably not a good idea. Just build the binary or whatever you’re trying to use yourself. The binaries in image often depend on libraries inside said image which can be different from your system.

Third, with containers you are forced to use whatever deployment the devs have chosen for you. Maybe I don’t want 10 postgres instances one for each service, or maybe I already have my nginx reverse proxy or so.

It might be easier (effort-wise) but you’re certainly not forced. At the very least you can clone the repo and just edit the Dockerfile to your liking. With compose file it’s the same story, just edit the thing. Or don’t use it at all. I frequently use compose file just for reference/documentation and run software as a set of systemd units in Nix. You do you. You don’t have to follow a path that someone paved if you don’t like the destination. Remember that it’s often someone’s free time that paid for this path, they are not obliged to provide perfect solution for you. They are not taking anything away from you by providing solution that someone else can use.

I’m huge fan of Nix, but for someone wondering if they should “learn docker” Nix is absolutely brutal.

Also IMO while there’s some overlap, one is not a complete replacement for the other. I use both in combination frequently.

I’m curious. How would you identify who’s guest and who’s not in this case?

With multiple networks it’s pretty easy as they are on a different network.

I have a bunch of these myself and that is my experience, but don’t have any screenshots now.

However there’s great comparison of these thin clients if you don’t mind Polish: https://www.youtube.com/watch?v=DLRplLPdd3Q

Just the relevant screens to save you some time:

Power usage:

Cinebench multi core:

The power usage in idle is within 2W from Pi 4 and the performance is about double compared to overclocked Pi 4. It’s really quite viable alternative unless you need really small device. The only alternative size-wise is slightly bigger WYSE 3040, but that one has x5-z8350 CPU, which sits somewhere between Pi3B+ and Pi4 performance-wise. It is also very low power though and if you don’t need that much CPU it is also very viable replacement. (these can be easily bought for about €60 on eBay, or cheaper if you shop around)

Also each W of extra idle power is about 9kWh extra consumed. Even if you paid 50c/kWh (which would be more than I’ve ever seen) that’s €5 per year extra. So I wouldn’t lose my sleep over 2W more or less. Prices here are high, 9kWh/y is rounding error.

Thin clients based on J5005 or J4105 generally idle under 5W. (Futro S740, Wyse 5070,…) They consume a bit more when 100% loaded (11W vs 8W), but they also provide about 2x performance of Pi4.

(That article you shared is measuring power consumption on the USB port, which does not take into account overhead of USB adapter itself)

If you search ebay for Intel based thin clients, many are more powerful than RPi while being passively cooled and having very similar power consumption.

The example even used unwrap_or_else where they should use unwrap_or. Then it uses std::i64::MIN as fallback value where they could use something like 0 that would be a better example and honestly make more sense there.

let parsed_numbers = ["1", "not a number", "3"]
    .iter()
    .map(|n| n.parse().unwrap_or(0))
    .collect();

// prints "[1, 0, 3]"
println!("{:?}", parsed_numbers);

Even without trimming this to something less convoluted, the same functionality (with different fallback value) could be written in more readable form.

Obviously in the context of the page something like this would make way more sense:

maybe_number.unwrap_or(0)

Or perhaps more idiomatic version of the above:

maybe_number.unwrap_or_default()

Is that Rust? Assuming a is an Option (which would be close approximation of OP’s nullable type) and assuming b is not null, then this would be closer to the original idea:

a.unwrap_or(b)

It returns value of a if it’s not None rather than Option.

Same with Adguard Home here sitting at 38MB.

I don’t have much experience with TS, but in other strongly typed language it goes even further than string vs number.

For example you can have two numbers Distance and TimeInSeconds and even though they are both numbers, the type system can make sure that you won’t do distance+time.

It can also let you do distance/time and return Speed type.

It will prevent many logical errors even though everything is technically a number.

I’m not sure where this idea of high profile target comes from. The sim swap attack is pretty common. People just need to be in some credentials leak DB with some hint of crypto trading or having some somewhat interesting social media account. (either interesting handle or larger number of followers)

There are now organized groups that essentially provide sim swap as a service. Sometimes employees of the telco company are in on it. The barrier to entry is not that high, so the expected reward does not need to be that much higher.

In Tailscale you can set up an exit node which lets you access the entire internet via its internet connection.

You could set up an exit node that would let you access the internet via some (anonymizing) VPN providers like Mullvad or any other.

This sounds like Tailscale is simply setting up this exit node for Mullvad on their side and providing it as a service. So it’s not like using another VPN anonymizers is impossible, it’s just convenient to use Mullvad.

RAID is not backup. RAID is used for increased capacity, throughput or uptime. (Depending on configuration)

Multiple volumes would likely get corrupted just as much with faulty RAM as RAID would. Besides RAM there’s controller, CPU, power supply and possibly more single points of failure in that NAS, that would destroy both RAID and multiple volumes.

So assuming you have external backup, I’d go with RAID for better uptime as opposed to some custom multi volume pseudo-RAID for the same.

Yeah it’s pretty amazing system all things considered. It’s kind of as if 8-bit home computer systems continued to evolve, but keep the same principles of being really closely tied to the HW and with very blurry line between kernel and user space. It radiates strong user ownership of the system. If you look at modern systems where you sometimes don’t even get superuser privileges (for better of worse) it’s quite a contrast.

Which is why it reminds me of Emacs so much. You can mess with most of the internals, there’s no major separation between “Emacs-space” and userspace. There are these jokes about Emacs being OS, but it really does remind me of those early days of home computing where you could tinker with low level stuff and there were no guardrails or locks stopping you.

GNU Hurd is going to be mainstream any minute now.