fossilesque@mander.xyzcake to Programmer Humor@lemmy.mlEnglish · 14 days agoNot incorrect.mander.xyzimagemessage-square79fedilinkarrow-up1691arrow-down115
arrow-up1676arrow-down1imageNot incorrect.mander.xyzfossilesque@mander.xyzcake to Programmer Humor@lemmy.mlEnglish · 14 days agomessage-square79fedilink
minus-squareTimeSquirrel@kbin.melroy.orglinkfedilinkarrow-up8·14 days agoSomething wrong with: #include <Arduino.h> void loop() { digitalWrite(13, HIGH); delay(1000); digitalWrite(13, LOW); delay(1000); } ? 😂🤮
minus-squareScrath@lemmy.dbzer0.comlinkfedilinkarrow-up12·13 days agoObviously the only correct way to blink an LED is to use a hardware timer to trigger a DMA transfer which stores a bit in the pin toggle register at a set interval
minus-squareanomnom@sh.itjust.workslinkfedilinkEnglisharrow-up3·13 days agoyeah! Or or use the interrupt pins and a 555 timer! both options are better than python though at least.
Something wrong with:
#include <Arduino.h> void loop() { digitalWrite(13, HIGH); delay(1000); digitalWrite(13, LOW); delay(1000); }? 😂🤮
Obviously the only correct way to blink an LED is to use a hardware timer to trigger a DMA transfer which stores a bit in the pin toggle register at a set interval
yeah! Or or use the interrupt pins and a 555 timer! both options are better than python though at least.