I’m planning on building a PC soon and, while I have done plenty of research, I’d like to hear advice from people who have experience in the area personally. It’s also just nice talking to other people in general, lol

  • araquen@beehaw.org
    link
    fedilink
    English
    arrow-up
    12
    ·
    1 year ago

    I would absolutely use “PC Part Picker” because as you assemble the various components, that site will tell you if there are incompatibilities. For instance whether a power supply will fit in the case.

    https://pcpartpicker.com

    And if you don’t have someone to bounce ideas off of, this is a pretty good site that was recommended to me to help narrow your choices.

    https://www.logicalincrements.com

    • aedyr@beehaw.org
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I’ve used Logical Increments for a couple builds and liked it a lot. I didn’t copy their recipe verbatim, but you get some good starting points both on compatibility and cost.

  • ramius345@beehaw.org
    link
    fedilink
    English
    arrow-up
    10
    ·
    edit-2
    1 year ago

    Don’t skimp on the power supply brand. Buy a reputable one. Buy one with headroom if you plan on upgrading your GPU at a later time.

    Watch some build videos from tech YouTubers and watch the steps they go through.

    For gaming start with the GPU and build around it. Pick a CPU with a reasonable price that will not bottleneck it. YouTube reviews are your friend here. Watch a few with your CPU and GPU pairing and get an idea of the average and one percent low marks.

    For your first PC, stick to air cooling. Pick a reputable brand.

    I personally like gamersnexus reviews for all the parts you can. They are very methodical with benchmarks. Ask questions here as you will have many.

    You may be building a PC for a use case other than gaming. If that’s the case you may want to pick another part to start your build around. For instance, developers have a different workload compiling code and would focus more on CPU and threaded workloads.

    Basically know your use case, budget, and ask specific questions as you learn from videos and the community will help you produce a great result.

  • starship_lizard@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    ·
    1 year ago

    Save everything that comes in your motherboard box. Don’t be the fool (me) who needs to buy m.2 screws on Amazon.

    • The_Hunted_One@beehaw.org
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      I end up saving everything from every box, haha. I still have all the cords from my modular PSUs sitting in my basement, still in their little bags

  • The_Hunted_One@beehaw.org
    link
    fedilink
    English
    arrow-up
    5
    ·
    1 year ago

    Slightly different advice from what others have said, but while building it, I’ve always used an anti static wristband, grounded to either ground or the pc case. Maybe I’m overly paranoid, but that’s what I was taught, and haven’t had any issues with ESD so far

  • ZapBeebz@beehaw.org
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    I highly recommend PC Partpicker for compiling all your components (although I don’t typically follow the listed purchase links). The comparability checker it has can save some real headaches!

    Otherwise, some general advice:

    1. Remember the motherboard standoff screws. Most cases these days have them pre-installed, but my first rig did not. And I bent the mobo a little bit before realizing my mistake. It still worked in the end, but it’s now my #1 cautionary tale about PC Building.

    2. Do yourself a favor, and make an attempt at proper cable management. It’ll make replacing components so much easier down the line.

    3. Get a fully modular PSU (if in your budget). This will help with #2 above immensely.

    4. Read the manual that comes with your motherboard. It usually has a lot of guidance for assembling the computer, especially if this is your first time.

    5. Have fun! PC Building/Gaming is one of my favorite hobbies, and I’m always glad to see new people getting interested in it!

    Good luck, and don’t be afraid to ask questions!

  • nadiaraven@beehaw.org
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    I’ve found that the motherboard is often the make or break item with PC builds. Pay attention to how many 1 star reviews there are on Amazon or wherever, I think they tend to suffer from poor quality control.

  • neal@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Do you live near a Microcenter? If so, I would recommend checking out their CPU/Motherboard combo deals.
    As a few other people have added, PC Partpicker is great for compatibility. Best of luck and feel free to ask questions as you go!

  • WallaWallaWa@beehaw.org
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Start the build outside of the case, use the box the motherboard came in as a table. Install the cpu, ram, hook up the psu (fully modular if your budget allows), power on and make sure all works. Easier to troubleshoot this way.

  • Mogster@beehaw.org
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    I found PCPartPicker really useful when I last built a PC:

    https://uk.pcpartpicker.com/

    It helps you pick compatible parts, and links to sites you can buy them from. I’d still shop around for the best price after building your list(s), but it’s a great place to start.

    • Sporebat@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I’d agree. I’ve built dozens of computers over the years and these days I always use PCPartPicker as the starting point for my builds.

    • Kilograph@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I used relied on this for my last 3 builds. In the most recent one, photos of certain board, cooler, and case configurations were fantastic because it visually showed me if things would actually fit together.

  • daddy_hacker@beehaw.org
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Lota of great advice here but my must have is a tray to put all the screws and other small bits. Far too easy to lose stuff. iFixit do a good one but you can find an equivalent lying around im sure.

  • RandomBit@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Depending on your use case (gaming, productivity, media creation, etc), RAM speed can have a big impact on performance. For higher end CPU’s and GPU’s, good cooling and airflow are paramount to get the best performance.

  • l4sgc@beehaw.org
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    It’s difficult to know what advice might be helpful for you without more context, but the one mistake I made with my last PC build was choosing a small form factor case. I thought it looked really clean not to have all that wasted space inside the case, but it makes any system changes much more arduous trying to squeeze my hands into tight spots.

    Also when I needed to upgrade my gpu a few months ago and filtered to ones that would fit in the case there was literally only 1 option, it wasn’t my first choice but it was close enough I went with it instead of dealing with the hassle of buying a new case and rebuilding everything. I know for sure I will need a new case the next time I need a new gpu though.

    The other thing I’ll mention is to make sure all your bios settings are configured correctly: resizable bar, XMP, etc.

    • PurrJPro@beehaw.orgOP
      link
      fedilink
      English
      arrow-up
      0
      ·
      1 year ago

      Thanks! Choosing a case that’s small enough to be easy to transport but not hard to build in is a concern, but I believe my current case will do well! Setting up the bios is what I’m more concerned with, but I’m sure I’ll manage. And sorry but the vagueness of the post, I’m generally looking for any advice instead of specific advice

      • l4sgc@beehaw.org
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Bios can be difficult because some of the settings are named differently if you have an amd or intel cpu. Additionally the interface and where the settings are located seems to be dependent on the motherboard manufacturer.

        But in general the important things that are required to install windows 11 are uefi boot and the tpm being enabled, and these will almost certainly be set to the correct values by default.

        For gaming performance resizable bar/smart access memory improves gpu performance, and xmp/expo improves ram performance, these is a decent chance these will not be enable in the bios by default.

        For programming, I also wanted to use the windows subsystem for linux, and I had to go to my bios and enable cpu virtualization for that. Not sure what other workflows might rely on virtualization.

        I’ll also just mention that at one point I had some instability related to restarting. If I tried to restart it would post but fail to boot into windows, but doing shut-down and then turning the computer on again worked fine. And I think I resolved that by disabling fast-boot in the bios. Note that I wouldn’t expect you to get that restart issue, I think it was related to me being on the insider-preview build of windows at the time. But fast-boot-off is something I made a note of as a good troubleshooting step.