• JesterRaiin@lemmy.world
    link
    fedilink
    English
    arrow-up
    55
    ·
    1 year ago

    Because a single label has little value, but they are bought in drums holding 1000s of them. And this means that many enterprises decide to lower the quality of the labels and thus cut some costs.

    After all, who will complain? Some rando on the Internet? 😘

    • deweydecibel@lemmy.world
      link
      fedilink
      English
      arrow-up
      15
      arrow-down
      5
      ·
      edit-2
      1 year ago

      With some exceptions, it is at most a minor annoyance, the vast majority of poeple are not so hung up on it that they’re going to bother raising a complaint.

      Besides, there is an argument to be made that the easier it is to remove an external label without leaving residue, the more likely it will fall off during shipping or stocking, or removed outright by someone before the customer gets it. These kinds of labels stay put and that’s what the company wants until it’s paid for.

      Hell, the label OP posted has “Important” right there. The manufacter wants to ensure that label stays right where it is until its in the customers hands so they can convey whatever they need to convey. These types of labels absolutely accomplish that.

      • Kukurutz@sh.itjust.worksOP
        link
        fedilink
        English
        arrow-up
        20
        ·
        1 year ago

        The label says “importado”, which means “imported”. It really had no important information on it. Of course, compared to other things this is a minor nuisance at most, but I still get mad every time. They even added a second label saying that the bowl is not dishwasher safe. And my wife bought a whole set, 20 pieces, 40 labels.

        • metaStatic@kbin.social
          link
          fedilink
          arrow-up
          7
          ·
          1 year ago

          where I am import labels usually have information that is legally required. if they fall off in transit the item could be considered illegal to sell. (not like anyone checks labeling requirements though)

      • JesterRaiin@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Nah, it says “IMPORTADO”, not Important. And if both the manufacturer of the product and its seller/re-seller accepted it, it means they think it “good enough”.

        Money beats logic, quality, professionalism. I work in corpo, I can attest it to be truth.

  • Nusm@lemmy.world
    link
    fedilink
    English
    arrow-up
    9
    arrow-down
    1
    ·
    edit-2
    1 year ago

    Mildly infuriating? No sir, this is seriously infuriating if I’ve ever seen it! 🤬

      • Anti Weeb Penguin@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Can’t believe i got ratio’d

        ⠟⢻⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡟⠛⢻⣿ ⡆⠊⠈⣿⢿⡟⠛⢿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⣎⠈⠻ ⣷⣠⠁⢀⠰⠀⣰⣿⣿⣿⣿⣿⣿⠟⠋⠛⠛⠿⠿⢿⣿⣿⣿⣧⠀⢹⣿⡑⠐⢰ ⣿⣿⠀⠁⠀⠀⣿⣿⣿⣿⠟⡩⠐⠀⠀⠀⠀⢐⠠⠈⠊⣿⣿⣿⡇⠘⠁⢀⠆⢀ ⣿⣿⣆⠀⠀⢤⣿⣿⡿⠃⠈⠀⣠⣶⣿⣿⣷⣦⡀⠀⠀⠈⢿⣿⣇⡆⠀⠀⣠⣾ ⣿⣿⣿⣧⣦⣿⣿⣿⡏⠀⠀⣰⣿⣿⣿⣿⣿⣿⣿⡆⠀⠀⠐⣿⣿⣷⣦⣷⣿⣿ ⣿⣿⣿⣿⣿⣿⣿⣿⡆⠀⢰⣿⣿⣿⣿⣿⣿⣿⣿⣿⡄⠀⠀⣿⣿⣿⣿⣿⣿⣿ ⣿⣿⣿⣿⣿⣿⣿⣿⡆⠀⣾⣿⣿⠋⠁⠀⠉⠻⣿⣿⣧⠀⠠⣿⣿⣿⣿⣿⣿⣿ ⣿⣿⣿⣿⣿⣿⣿⣿⣿⡀⣿⡿⠁⠀⠀⠀⠀⠀⠘⢿⣿⠀⣺⣿⣿⣿⣿⣿⣿⣿ ⣿⣿⣿⣿⣿⣿⣿⣿⣿⣧⣠⣂⠀⠀⠀⠀⠀⠀⠀⢀⣁⢠⣿⣿⣿⣿⣿⣿⣿⣿ ⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⣶⣄⣤⣤⣔⣶⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿

  • deweydecibel@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    It’s still a thing because why wouldn’t it be? It’s, after all, mildly infuriating. Not enough of an annoyance or issue to push anyone to change.

    Also, “Importado”. The label has some sort of message they need to make sure the customer reads, so they make it very difficult to remove in transit.

  • skillissuer@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    put this spawn of satan under a tissue soaked in light petroleum spirit (light hydrotreated naphta/petroleum ether also works). it’s unlikely that this solvent will damage about anything other than glue, which it dissolves pretty well, even lettering should be left unscratched

  • DrNeurohax@kbin.social
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    If the surface is flat enough, start with a scraper. One of those single edged replaceable blade deals. That’ll quickly take off 90%, if not all of it. If the blade gets sticky and you want to made another pass, wipe it off with some oil (basically any, even olive oil). Then go for the other suggestions, like rubbing the sticker with oil and alcohol.

    This works much quicker than just oil and alcohol, BUT the surface has to be flat. If it isn’t flat, it has to be non-razor-blade-damage-vulnerable material.

  • Sufferance@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    I hate it when stickers tear while shredding mail and it’s not safe to leave your address on the mail when you throw it away.